Dentin bond strength of fluoride-releasing materials

Franklin Garcia-Godoy, Manuel Rodríguez, Elena Barbería

Research output: Contribution to journalArticle

16 Citations (Scopus)

Abstract

Purpose: To evaluate the shear bond strength to dentin of fluoride-releasing materials. Materials and Methods: Human, noncarious extracted permanent molars stored in distilled water were used. Flat buccal and lingual dentin surfaces were ground wet on 600-grit silicon carbide paper. The teeth were then distributed at random into three groups of 8 teeth (16 surfaces) each: Group 1: Compoglass; Group 2: Fuji II LC; Group 3: Dyract. Cylindrical samples of the materials were prepared in plastic molds and bonded to the dentin surface according to the manufacturers' instructions. All samples were placed in distilled water for 24 hours, thermocycled for 500 cycles in distilled water at 6°C and 60°C and sheared with an Instron at a crosshead speed of 0.5 mm/minute. Results: In MPa: Group 1: 16.29 ± 5.35; Group 2: 15.42 ± 4.77; Group 3: 15.33 ± 6.96. ANOVA revealed that there was no statistically significant difference between the groups. Fracture patterns, examined with the SEM, revealed material cohesive failures for all groups.

Original languageEnglish (US)
Pages (from-to)80-82
Number of pages3
JournalAmerican Journal of Dentistry
Volume9
Issue number2
StatePublished - Dec 1 1996
Externally publishedYes

Fingerprint

Dentin
Fluorides
Water
Tooth
Shear Strength
Cheek
Tongue
Plastics
Analysis of Variance

All Science Journal Classification (ASJC) codes

  • Dentistry(all)

Cite this

Dentin bond strength of fluoride-releasing materials. / Garcia-Godoy, Franklin; Rodríguez, Manuel; Barbería, Elena.

In: American Journal of Dentistry, Vol. 9, No. 2, 01.12.1996, p. 80-82.

Research output: Contribution to journalArticle

Garcia-Godoy, F, Rodríguez, M & Barbería, E 1996, 'Dentin bond strength of fluoride-releasing materials', American Journal of Dentistry, vol. 9, no. 2, pp. 80-82.
Garcia-Godoy, Franklin ; Rodríguez, Manuel ; Barbería, Elena. / Dentin bond strength of fluoride-releasing materials. In: American Journal of Dentistry. 1996 ; Vol. 9, No. 2. pp. 80-82.
@article{1b7949c71d4d4a4c98205a2308737f2a,
title = "Dentin bond strength of fluoride-releasing materials",
abstract = "Purpose: To evaluate the shear bond strength to dentin of fluoride-releasing materials. Materials and Methods: Human, noncarious extracted permanent molars stored in distilled water were used. Flat buccal and lingual dentin surfaces were ground wet on 600-grit silicon carbide paper. The teeth were then distributed at random into three groups of 8 teeth (16 surfaces) each: Group 1: Compoglass; Group 2: Fuji II LC; Group 3: Dyract. Cylindrical samples of the materials were prepared in plastic molds and bonded to the dentin surface according to the manufacturers' instructions. All samples were placed in distilled water for 24 hours, thermocycled for 500 cycles in distilled water at 6°C and 60°C and sheared with an Instron at a crosshead speed of 0.5 mm/minute. Results: In MPa: Group 1: 16.29 ± 5.35; Group 2: 15.42 ± 4.77; Group 3: 15.33 ± 6.96. ANOVA revealed that there was no statistically significant difference between the groups. Fracture patterns, examined with the SEM, revealed material cohesive failures for all groups.",
author = "Franklin Garcia-Godoy and Manuel Rodr{\'i}guez and Elena Barber{\'i}a",
year = "1996",
month = "12",
day = "1",
language = "English (US)",
volume = "9",
pages = "80--82",
journal = "American Journal of Dentistry",
issn = "0894-8275",
publisher = "Mosher and Linder, Inc",
number = "2",

}

TY - JOUR

T1 - Dentin bond strength of fluoride-releasing materials

AU - Garcia-Godoy, Franklin

AU - Rodríguez, Manuel

AU - Barbería, Elena

PY - 1996/12/1

Y1 - 1996/12/1

N2 - Purpose: To evaluate the shear bond strength to dentin of fluoride-releasing materials. Materials and Methods: Human, noncarious extracted permanent molars stored in distilled water were used. Flat buccal and lingual dentin surfaces were ground wet on 600-grit silicon carbide paper. The teeth were then distributed at random into three groups of 8 teeth (16 surfaces) each: Group 1: Compoglass; Group 2: Fuji II LC; Group 3: Dyract. Cylindrical samples of the materials were prepared in plastic molds and bonded to the dentin surface according to the manufacturers' instructions. All samples were placed in distilled water for 24 hours, thermocycled for 500 cycles in distilled water at 6°C and 60°C and sheared with an Instron at a crosshead speed of 0.5 mm/minute. Results: In MPa: Group 1: 16.29 ± 5.35; Group 2: 15.42 ± 4.77; Group 3: 15.33 ± 6.96. ANOVA revealed that there was no statistically significant difference between the groups. Fracture patterns, examined with the SEM, revealed material cohesive failures for all groups.

AB - Purpose: To evaluate the shear bond strength to dentin of fluoride-releasing materials. Materials and Methods: Human, noncarious extracted permanent molars stored in distilled water were used. Flat buccal and lingual dentin surfaces were ground wet on 600-grit silicon carbide paper. The teeth were then distributed at random into three groups of 8 teeth (16 surfaces) each: Group 1: Compoglass; Group 2: Fuji II LC; Group 3: Dyract. Cylindrical samples of the materials were prepared in plastic molds and bonded to the dentin surface according to the manufacturers' instructions. All samples were placed in distilled water for 24 hours, thermocycled for 500 cycles in distilled water at 6°C and 60°C and sheared with an Instron at a crosshead speed of 0.5 mm/minute. Results: In MPa: Group 1: 16.29 ± 5.35; Group 2: 15.42 ± 4.77; Group 3: 15.33 ± 6.96. ANOVA revealed that there was no statistically significant difference between the groups. Fracture patterns, examined with the SEM, revealed material cohesive failures for all groups.

UR - http://www.scopus.com/inward/record.url?scp=0030112139&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0030112139&partnerID=8YFLogxK

M3 - Article

VL - 9

SP - 80

EP - 82

JO - American Journal of Dentistry

JF - American Journal of Dentistry

SN - 0894-8275

IS - 2

ER -