Effect of dentin adhesives on sealant bond strength.

Franklin Garcia-Godoy, R. L. Cooley, D. M. Ranly, K. M. Burger

Research output: Contribution to journalArticle

9 Citations (Scopus)

Abstract

This study evaluated the effect of four dentin adhesives on sealant shear bond strength. Five groups of 15 human extracted teeth (75 in total) were prepared to receive the following treatments: group 1, sealant only; group 2, sealant plus gluma primer; group 3, sealant plus gluma primer and sealer, group 4, sealant plus C & B Metabond. Each tooth had a bonding site prepared for each material by grinding a flat plane on the enamel with 600 grit. The enamel site was etched for 30 seconds, washed for 20 seconds and dried. Each material was mixed according to the instructions of the manufacturer. The sealant (Concise) was placed in a nylon cylinder, light-cured, stored in distilled water for 24 hours, thermocycled (100 cycles at 5 to 55 degrees C) and shear bond strength determined with a knife-edge blade in an Instron running at a crosshead speed of 0.5 mm/min. The results in MPa were: group 1, 11.8 +/- 4.5; group 2, 12.3 +/- 5.0; group 3, 10.3 +/- 1.9; group 4, 12.5 +/- 8.6; and group 5, 15.8 +/- 5.2. Statistically (ANOVA one way) there was no significant difference in the groups.

Original languageEnglish (US)
Pages (from-to)241-243
Number of pages3
JournalJournal of Clinical Pediatric Dentistry
Volume15
Issue number4
StatePublished - Jun 1991
Externally publishedYes

Fingerprint

Shear Strength
Dentin
Dental Enamel
Adhesives
Tooth
Nylons
Running
Analysis of Variance
Light
Water
Gluma

All Science Journal Classification (ASJC) codes

  • Medicine(all)

Cite this

Garcia-Godoy, F., Cooley, R. L., Ranly, D. M., & Burger, K. M. (1991). Effect of dentin adhesives on sealant bond strength. Journal of Clinical Pediatric Dentistry, 15(4), 241-243.

Effect of dentin adhesives on sealant bond strength. / Garcia-Godoy, Franklin; Cooley, R. L.; Ranly, D. M.; Burger, K. M.

In: Journal of Clinical Pediatric Dentistry, Vol. 15, No. 4, 06.1991, p. 241-243.

Research output: Contribution to journalArticle

Garcia-Godoy, F, Cooley, RL, Ranly, DM & Burger, KM 1991, 'Effect of dentin adhesives on sealant bond strength.', Journal of Clinical Pediatric Dentistry, vol. 15, no. 4, pp. 241-243.
Garcia-Godoy, Franklin ; Cooley, R. L. ; Ranly, D. M. ; Burger, K. M. / Effect of dentin adhesives on sealant bond strength. In: Journal of Clinical Pediatric Dentistry. 1991 ; Vol. 15, No. 4. pp. 241-243.
@article{980bf6f0fa1847ea82c7caf3cc09fa67,
title = "Effect of dentin adhesives on sealant bond strength.",
abstract = "This study evaluated the effect of four dentin adhesives on sealant shear bond strength. Five groups of 15 human extracted teeth (75 in total) were prepared to receive the following treatments: group 1, sealant only; group 2, sealant plus gluma primer; group 3, sealant plus gluma primer and sealer, group 4, sealant plus C & B Metabond. Each tooth had a bonding site prepared for each material by grinding a flat plane on the enamel with 600 grit. The enamel site was etched for 30 seconds, washed for 20 seconds and dried. Each material was mixed according to the instructions of the manufacturer. The sealant (Concise) was placed in a nylon cylinder, light-cured, stored in distilled water for 24 hours, thermocycled (100 cycles at 5 to 55 degrees C) and shear bond strength determined with a knife-edge blade in an Instron running at a crosshead speed of 0.5 mm/min. The results in MPa were: group 1, 11.8 +/- 4.5; group 2, 12.3 +/- 5.0; group 3, 10.3 +/- 1.9; group 4, 12.5 +/- 8.6; and group 5, 15.8 +/- 5.2. Statistically (ANOVA one way) there was no significant difference in the groups.",
author = "Franklin Garcia-Godoy and Cooley, {R. L.} and Ranly, {D. M.} and Burger, {K. M.}",
year = "1991",
month = "6",
language = "English (US)",
volume = "15",
pages = "241--243",
journal = "Journal of Clinical Pediatric Dentistry",
issn = "1053-4628",
publisher = "Journal of Clinical Pediatric Dentistry",
number = "4",

}

TY - JOUR

T1 - Effect of dentin adhesives on sealant bond strength.

AU - Garcia-Godoy, Franklin

AU - Cooley, R. L.

AU - Ranly, D. M.

AU - Burger, K. M.

PY - 1991/6

Y1 - 1991/6

N2 - This study evaluated the effect of four dentin adhesives on sealant shear bond strength. Five groups of 15 human extracted teeth (75 in total) were prepared to receive the following treatments: group 1, sealant only; group 2, sealant plus gluma primer; group 3, sealant plus gluma primer and sealer, group 4, sealant plus C & B Metabond. Each tooth had a bonding site prepared for each material by grinding a flat plane on the enamel with 600 grit. The enamel site was etched for 30 seconds, washed for 20 seconds and dried. Each material was mixed according to the instructions of the manufacturer. The sealant (Concise) was placed in a nylon cylinder, light-cured, stored in distilled water for 24 hours, thermocycled (100 cycles at 5 to 55 degrees C) and shear bond strength determined with a knife-edge blade in an Instron running at a crosshead speed of 0.5 mm/min. The results in MPa were: group 1, 11.8 +/- 4.5; group 2, 12.3 +/- 5.0; group 3, 10.3 +/- 1.9; group 4, 12.5 +/- 8.6; and group 5, 15.8 +/- 5.2. Statistically (ANOVA one way) there was no significant difference in the groups.

AB - This study evaluated the effect of four dentin adhesives on sealant shear bond strength. Five groups of 15 human extracted teeth (75 in total) were prepared to receive the following treatments: group 1, sealant only; group 2, sealant plus gluma primer; group 3, sealant plus gluma primer and sealer, group 4, sealant plus C & B Metabond. Each tooth had a bonding site prepared for each material by grinding a flat plane on the enamel with 600 grit. The enamel site was etched for 30 seconds, washed for 20 seconds and dried. Each material was mixed according to the instructions of the manufacturer. The sealant (Concise) was placed in a nylon cylinder, light-cured, stored in distilled water for 24 hours, thermocycled (100 cycles at 5 to 55 degrees C) and shear bond strength determined with a knife-edge blade in an Instron running at a crosshead speed of 0.5 mm/min. The results in MPa were: group 1, 11.8 +/- 4.5; group 2, 12.3 +/- 5.0; group 3, 10.3 +/- 1.9; group 4, 12.5 +/- 8.6; and group 5, 15.8 +/- 5.2. Statistically (ANOVA one way) there was no significant difference in the groups.

UR - http://www.scopus.com/inward/record.url?scp=0026179291&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0026179291&partnerID=8YFLogxK

M3 - Article

VL - 15

SP - 241

EP - 243

JO - Journal of Clinical Pediatric Dentistry

JF - Journal of Clinical Pediatric Dentistry

SN - 1053-4628

IS - 4

ER -