Influence of a cylindrical crosshead on shear bond testing of composite-tooth interfaces

Research output: Contribution to journalArticle

Abstract

The effect of a cylindrical crosshead on shear bond strength of composite to dentin was assessed by finite element analysis (FEA) after shear bond testing thirty mandibular molars restored with composite cylinders (Tetric EvoCeram-3 mm diameter) perpendicular to conditioned dentin. Cross-sectional geometric models were created with quadrilateral linear plane stress elements. Stress distributions for normal, shear, and major principal stresses were plotted. Mean shear bond strength for the experimental group was 23.9 MPa (±4.54), about 15–75% higher than values reported with other methods. FEA showed localized ‘hot spots’ (±16–20 MPa) at the corners of the base of the adhesive layer under a 20 N vertical load. Principal stresses across the composite-dentin interface were lower (±12–16 MPa), but significantly homogenous, approximating closely the nominal strength value. With uniform stress distributions across the adhesive layer, FEA confirmed that a cylindrical crosshead may be an optional tool to improve shear bond testing of dental materials.

Original languageEnglish (US)
Pages (from-to)865-873
Number of pages9
JournalDental Materials Journal
Volume37
Issue number6
DOIs
StatePublished - Jan 1 2018

Fingerprint

Finite Element Analysis
Dentin
Shear Strength
Tooth
Finite element method
Adhesives
Stress concentration
Composite materials
Testing
Dental materials
Dental Materials
Normal Distribution
Loads (forces)

All Science Journal Classification (ASJC) codes

  • Ceramics and Composites
  • Dentistry(all)

Cite this

Influence of a cylindrical crosshead on shear bond testing of composite-tooth interfaces. / Ivanoff, Chris S.; Hottel, Timothy; Garcia-Godoy, Franklin.

In: Dental Materials Journal, Vol. 37, No. 6, 01.01.2018, p. 865-873.

Research output: Contribution to journalArticle

@article{2479811f9ec74dc09310f367e07c17ab,
title = "Influence of a cylindrical crosshead on shear bond testing of composite-tooth interfaces",
abstract = "The effect of a cylindrical crosshead on shear bond strength of composite to dentin was assessed by finite element analysis (FEA) after shear bond testing thirty mandibular molars restored with composite cylinders (Tetric EvoCeram-3 mm diameter) perpendicular to conditioned dentin. Cross-sectional geometric models were created with quadrilateral linear plane stress elements. Stress distributions for normal, shear, and major principal stresses were plotted. Mean shear bond strength for the experimental group was 23.9 MPa (±4.54), about 15–75{\%} higher than values reported with other methods. FEA showed localized ‘hot spots’ (±16–20 MPa) at the corners of the base of the adhesive layer under a 20 N vertical load. Principal stresses across the composite-dentin interface were lower (±12–16 MPa), but significantly homogenous, approximating closely the nominal strength value. With uniform stress distributions across the adhesive layer, FEA confirmed that a cylindrical crosshead may be an optional tool to improve shear bond testing of dental materials.",
author = "Ivanoff, {Chris S.} and Timothy Hottel and Franklin Garcia-Godoy",
year = "2018",
month = "1",
day = "1",
doi = "10.4012/dmj.2017-348",
language = "English (US)",
volume = "37",
pages = "865--873",
journal = "Dental Materials Journal",
issn = "0287-4547",
publisher = "Japanese Society for Dental Materials and Devices",
number = "6",

}

TY - JOUR

T1 - Influence of a cylindrical crosshead on shear bond testing of composite-tooth interfaces

AU - Ivanoff, Chris S.

AU - Hottel, Timothy

AU - Garcia-Godoy, Franklin

PY - 2018/1/1

Y1 - 2018/1/1

N2 - The effect of a cylindrical crosshead on shear bond strength of composite to dentin was assessed by finite element analysis (FEA) after shear bond testing thirty mandibular molars restored with composite cylinders (Tetric EvoCeram-3 mm diameter) perpendicular to conditioned dentin. Cross-sectional geometric models were created with quadrilateral linear plane stress elements. Stress distributions for normal, shear, and major principal stresses were plotted. Mean shear bond strength for the experimental group was 23.9 MPa (±4.54), about 15–75% higher than values reported with other methods. FEA showed localized ‘hot spots’ (±16–20 MPa) at the corners of the base of the adhesive layer under a 20 N vertical load. Principal stresses across the composite-dentin interface were lower (±12–16 MPa), but significantly homogenous, approximating closely the nominal strength value. With uniform stress distributions across the adhesive layer, FEA confirmed that a cylindrical crosshead may be an optional tool to improve shear bond testing of dental materials.

AB - The effect of a cylindrical crosshead on shear bond strength of composite to dentin was assessed by finite element analysis (FEA) after shear bond testing thirty mandibular molars restored with composite cylinders (Tetric EvoCeram-3 mm diameter) perpendicular to conditioned dentin. Cross-sectional geometric models were created with quadrilateral linear plane stress elements. Stress distributions for normal, shear, and major principal stresses were plotted. Mean shear bond strength for the experimental group was 23.9 MPa (±4.54), about 15–75% higher than values reported with other methods. FEA showed localized ‘hot spots’ (±16–20 MPa) at the corners of the base of the adhesive layer under a 20 N vertical load. Principal stresses across the composite-dentin interface were lower (±12–16 MPa), but significantly homogenous, approximating closely the nominal strength value. With uniform stress distributions across the adhesive layer, FEA confirmed that a cylindrical crosshead may be an optional tool to improve shear bond testing of dental materials.

UR - http://www.scopus.com/inward/record.url?scp=85061926808&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85061926808&partnerID=8YFLogxK

U2 - 10.4012/dmj.2017-348

DO - 10.4012/dmj.2017-348

M3 - Article

VL - 37

SP - 865

EP - 873

JO - Dental Materials Journal

JF - Dental Materials Journal

SN - 0287-4547

IS - 6

ER -