The shear bond strength of resin-based composite to white mineral trioxide aggregate.

Prasanna Neelakantan, Deeksha Grotra, Chandragiri Venkata Subbarao, Franklin Garcia-Godoy

Research output: Contribution to journalArticle

16 Citations (Scopus)

Abstract

It is unknown if resin-based composite can be placed on top of mineral trioxide aggregate (MTA) immediately after placement of the MTA. The authors aimed to measure the bond strength of a resin-based composite to white MTA (WMTA) with different bonding strategies at different intervals. The authors bonded resin-based composite to MTA with three bonding protocols (n = 45 per group) (group 1, total-etching adhesive; group 2, two-step self-etching adhesive; or group 3, one-step self-etching adhesive), immediately (subgroup A), 45 minutes (subgroup B) or 24 hours (subgroup C) after placement of the MTA. The authors measured shear bond strength by means of a universal testing machine and performed statistical analysis of the data by means of two-way and one-way analysis of variance (P < .05). In all three groups, subgroup A demonstrated greater bond strengths than the other subgroups. Group/subgroup 3/A demonstrated the highest bond strength (mean [standard deviation] 49.2 [2.1] megapascals), which was significantly higher than that in all other groups (P < .05). This was followed by group/subgroup 1/A (40.2 [2.5] MPa), 2/A (38.4 [1.3] MPa) and 1/B (38.5 [1.91] MPa). The lowest bond strength was shown by group/subgroup 2/C (14.7 [1.90] MPa). There was a significant difference between the two-step and one-step self-etching adhesives at all three intervals (P < .05). Within the limitations of this study, the representative one-step self-etching adhesive demonstrated the strongest bond to WMTA immediately after fabrication of MTA samples. One-step self-etching adhesive may be used to bond resin-based composite to WMTA immediately after placement, thereby offsetting the need for a second appointment for permanent restoration.

Original languageEnglish (US)
JournalJournal of the American Dental Association (1939)
Volume143
Issue number8
StatePublished - Aug 1 2012

Fingerprint

Shear Strength
Composite Resins
Adhesives
Pemetrexed
Statistical Data Interpretation
mineral trioxide aggregate
Analysis of Variance
Appointments and Schedules

All Science Journal Classification (ASJC) codes

  • Dentistry(all)

Cite this

The shear bond strength of resin-based composite to white mineral trioxide aggregate. / Neelakantan, Prasanna; Grotra, Deeksha; Subbarao, Chandragiri Venkata; Garcia-Godoy, Franklin.

In: Journal of the American Dental Association (1939), Vol. 143, No. 8, 01.08.2012.

Research output: Contribution to journalArticle

@article{c60b6cda590c484e91a125cdc9767040,
title = "The shear bond strength of resin-based composite to white mineral trioxide aggregate.",
abstract = "It is unknown if resin-based composite can be placed on top of mineral trioxide aggregate (MTA) immediately after placement of the MTA. The authors aimed to measure the bond strength of a resin-based composite to white MTA (WMTA) with different bonding strategies at different intervals. The authors bonded resin-based composite to MTA with three bonding protocols (n = 45 per group) (group 1, total-etching adhesive; group 2, two-step self-etching adhesive; or group 3, one-step self-etching adhesive), immediately (subgroup A), 45 minutes (subgroup B) or 24 hours (subgroup C) after placement of the MTA. The authors measured shear bond strength by means of a universal testing machine and performed statistical analysis of the data by means of two-way and one-way analysis of variance (P < .05). In all three groups, subgroup A demonstrated greater bond strengths than the other subgroups. Group/subgroup 3/A demonstrated the highest bond strength (mean [standard deviation] 49.2 [2.1] megapascals), which was significantly higher than that in all other groups (P < .05). This was followed by group/subgroup 1/A (40.2 [2.5] MPa), 2/A (38.4 [1.3] MPa) and 1/B (38.5 [1.91] MPa). The lowest bond strength was shown by group/subgroup 2/C (14.7 [1.90] MPa). There was a significant difference between the two-step and one-step self-etching adhesives at all three intervals (P < .05). Within the limitations of this study, the representative one-step self-etching adhesive demonstrated the strongest bond to WMTA immediately after fabrication of MTA samples. One-step self-etching adhesive may be used to bond resin-based composite to WMTA immediately after placement, thereby offsetting the need for a second appointment for permanent restoration.",
author = "Prasanna Neelakantan and Deeksha Grotra and Subbarao, {Chandragiri Venkata} and Franklin Garcia-Godoy",
year = "2012",
month = "8",
day = "1",
language = "English (US)",
volume = "143",
journal = "Journal of the American Dental Association",
issn = "0002-8177",
publisher = "American Dental Association",
number = "8",

}

TY - JOUR

T1 - The shear bond strength of resin-based composite to white mineral trioxide aggregate.

AU - Neelakantan, Prasanna

AU - Grotra, Deeksha

AU - Subbarao, Chandragiri Venkata

AU - Garcia-Godoy, Franklin

PY - 2012/8/1

Y1 - 2012/8/1

N2 - It is unknown if resin-based composite can be placed on top of mineral trioxide aggregate (MTA) immediately after placement of the MTA. The authors aimed to measure the bond strength of a resin-based composite to white MTA (WMTA) with different bonding strategies at different intervals. The authors bonded resin-based composite to MTA with three bonding protocols (n = 45 per group) (group 1, total-etching adhesive; group 2, two-step self-etching adhesive; or group 3, one-step self-etching adhesive), immediately (subgroup A), 45 minutes (subgroup B) or 24 hours (subgroup C) after placement of the MTA. The authors measured shear bond strength by means of a universal testing machine and performed statistical analysis of the data by means of two-way and one-way analysis of variance (P < .05). In all three groups, subgroup A demonstrated greater bond strengths than the other subgroups. Group/subgroup 3/A demonstrated the highest bond strength (mean [standard deviation] 49.2 [2.1] megapascals), which was significantly higher than that in all other groups (P < .05). This was followed by group/subgroup 1/A (40.2 [2.5] MPa), 2/A (38.4 [1.3] MPa) and 1/B (38.5 [1.91] MPa). The lowest bond strength was shown by group/subgroup 2/C (14.7 [1.90] MPa). There was a significant difference between the two-step and one-step self-etching adhesives at all three intervals (P < .05). Within the limitations of this study, the representative one-step self-etching adhesive demonstrated the strongest bond to WMTA immediately after fabrication of MTA samples. One-step self-etching adhesive may be used to bond resin-based composite to WMTA immediately after placement, thereby offsetting the need for a second appointment for permanent restoration.

AB - It is unknown if resin-based composite can be placed on top of mineral trioxide aggregate (MTA) immediately after placement of the MTA. The authors aimed to measure the bond strength of a resin-based composite to white MTA (WMTA) with different bonding strategies at different intervals. The authors bonded resin-based composite to MTA with three bonding protocols (n = 45 per group) (group 1, total-etching adhesive; group 2, two-step self-etching adhesive; or group 3, one-step self-etching adhesive), immediately (subgroup A), 45 minutes (subgroup B) or 24 hours (subgroup C) after placement of the MTA. The authors measured shear bond strength by means of a universal testing machine and performed statistical analysis of the data by means of two-way and one-way analysis of variance (P < .05). In all three groups, subgroup A demonstrated greater bond strengths than the other subgroups. Group/subgroup 3/A demonstrated the highest bond strength (mean [standard deviation] 49.2 [2.1] megapascals), which was significantly higher than that in all other groups (P < .05). This was followed by group/subgroup 1/A (40.2 [2.5] MPa), 2/A (38.4 [1.3] MPa) and 1/B (38.5 [1.91] MPa). The lowest bond strength was shown by group/subgroup 2/C (14.7 [1.90] MPa). There was a significant difference between the two-step and one-step self-etching adhesives at all three intervals (P < .05). Within the limitations of this study, the representative one-step self-etching adhesive demonstrated the strongest bond to WMTA immediately after fabrication of MTA samples. One-step self-etching adhesive may be used to bond resin-based composite to WMTA immediately after placement, thereby offsetting the need for a second appointment for permanent restoration.

UR - http://www.scopus.com/inward/record.url?scp=84871867857&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84871867857&partnerID=8YFLogxK

M3 - Article

C2 - 22855910

AN - SCOPUS:84871867857

VL - 143

JO - Journal of the American Dental Association

JF - Journal of the American Dental Association

SN - 0002-8177

IS - 8

ER -